You are here

AIF and PIF Vertical Dry Tubes

The auxiliary irradiation facility (AIF) vertical dry tube is a 2.45-inch inner-diameter tube that extends from above the reactor pool down into a position in the core grid along the south edge of the core. It has a ~9x1012 n/cm2/s maximum total flux and ~5x1012 n/cm2/s maximum thermal flux. Likewise, the peripheral irradiation facility (PIF) vertical dry tube is a 2.5-inch inner-diameter tube that extends from above the reactor pool down into the core grid at the northeast corner of the core.  It has a ~5x1012n/cm2/s maximum total flux and ~3x1012 n/cm2/s maximum thermal flux. See the facility fluxes page for the present values for total and thermal flux.

The shielding plug for each tube has a cableway that allows cabling out of the dry tube to enable in-situ measurements from instrumented experiments, and for irradiating samples there is an aluminum sample basket available.

AIF and PIF dry tubes

An aluminum irradiation basket is available for irradiating samples in the AIF or PIF, and it can accommodate samples with a diameter up to 2". Another irradiation basket is available for irradiation with a hard neutron spectrum. The basket has a cadmium liner to screen out neutrons with energies less than ~0.5 eV, which is useful for neutron displacement damage experiments in which minimal activation from thermal neutrons is desired. The cadmium liner allows for samples with a cross section up to 1.25"x1.25".

Aluminum Irradiation Basket